RESTORATION OF CARS AND BIKES

Interior restoration

Interior restoration is the process of returning the inside of the vehicle to its original factory state. Often a vehicle’s interior must need to be completely stripped out before restoration can occur. This is because deterioration over time that can leave materials like wood, cloth, or leather in unusable condition. The seat is still considered to be authentic after undergoing this process. Other areas of interior restoration include replaced instrument panelingcar radios, flooring, and wooden paneling

All mechanical and electronic equipment such as a speedometergas gaugeairbags, and other equipment necessary to the safe operation of the vehicle must be inspected. The vehicle interior is considered restored when it is returned the state of function and aesthetic the car was in after its manufacture.

Exterior restoration

Restoration of a vehicle’s exterior can take many forms. A vehicle that has been left or abandoned will often accumulate rust over time. Sometimes this rust deterioration can render an exterior part unusable. In which case a replacement part like a fender, front grill, or door mirror must be purchased outright from an external source. If rust damage is minor however the part will undergo rust repair. This is the process of removing rust from metal and returning structural integrity. This is accomplished by removing the rust through sanding or blasting to get down to the bare metal. Then new sheet metal or fiberglass is applied to the affected area. Finally, the piece is worked until smooth, primed, and re-painted.

Other materials like glass and weather stripping must be replaced as they become damaged over time. Factors like weather erosion can lead to faded and broken glass as well as dried out weather stripping. Another typical area of exterior repair is dent removal. This entails taking the original metal and re-working it to remove dents and other such blemishes. Professionals often use hammer and dolly work to remove dents. This involves placing the dented metal piece over a curved metal dolly and using an electric or manual hammer to remove the dent and smooth the metal. Often, vehicles require plastic headlight restoration as headlights can become foggy over time due to weathering.

Engine restoration

The internal combustion engine requires regular maintenance to ensure its continued function. Engine oilpower steering, and brake fluid are examples of engine maintenance that must be kept and checked at regular intervals. Often wear and tear over time can leave an engine totally unusable, in which case the restorer might remove the existing engine and replace it with a similar or modern engine substitute. In order to conduct an engine restoration first, a technician will conduct a thorough inspection. Often pre-restored vehicle has engines that have gone without maintenance for years and therefore require engine restoration to return them to working order. The engine is removed from the car and inspected for broken and non-functional parts. Typical parts that require replacing include the pistonsspark plugsfuel linesbatteryfusestiming belt, and various gaskets. All are subject to deterioration over time. Structural components like the engine blockcamshaft, and crankshaft are less likely to require repair but not uncommon. Typically, after all, the required parts are gathered, the disassembled pieces will be cleaned, lubricated (if required), and reassembled. The engine is then replaced within the car.

A mechanic will then perform a series of tests to ensure that the engine is in working, roadworthy condition. This is known as a pre-start engine check. First, all the lines and hoses are checked for breaks and leaks. Second, the radiator is topped off with water to ensure that the system is sealed off. Next, the oil level is replenished. Finally, the battery charge is checked and the ignition system is inspected. The engine is then ready to be started.

Restoration of a vehicle refers to the process of restoring a vehicle to its original condition. Neither updating nor modifying is considered part of the restoration process. A restored car is one that has had all of its systems and/or parts restored to the original condition. Selectively restoring parts or systems is referred to as refurbishing. It does not qualify as restoration. Rebuilding an engine may restore that engine, but it does not restore the car, or entitle the car to be called a restoration.

A car that has had its bodywork restored to like-new condition but has undergone some modifications elsewhere is either a modified car or a resto-mod car, neither being completely restored nor completely modified. If a car has had an engine swap for other than the original model, that car has not been restored. Although most of the parts are original, it qualifies as modified rather than restored.

There are many aspects to the process of vehicle restoration. The goal is to return the vehicle to its 'original' state. To accomplish this, a vehicle must often undergo many structural and aesthetic changes

CALL US

098853 23333

EMAIL US

OPENING HOURS

Mon - Sat : 10am - 9pm

EXPERIENCE

OVER 49 YEARS -Jubilee Junction has a wide range of products and services. Best Car Solutions is a comprehensive one-stop maintenance and repair company focused on delivering the best service and quality finish for the most affordable prices. We take much pride in our work and believe that every automotive owner deserves to have a car that is always in the best condition.

OUR SERVICES

VISIT US

- Mechanics

- Car Checks

- Oil and Break Checks

- Tire Change

- Battery Change

-Complete Car Service

-Bike Service

-Accessories of quality brands

-24/7 Breakdown service

-Nano Car & Bike Coatings 

Door No 1-8-32/69/1, Minister Road,

Near Kims Hospital 

Secunderabad,  - 500003,

Shop No 1, Main Road, Kondapur, Beside Varun Two Wheeler & KTM Showroom, Hyderabad - 500084,

  • Facebook
  • YouTube
  • Instagram

Copyright 1971-2020 Jubilee Junction, Website Created by www.rathibhai.com